Guide: Add Devices to a Company in ZPE Cloud

Overview

There are different methods to associate Nodegrid appliances with a specific ZPE Cloud company: Claim ID, Transfer Key or Customer Code and Enrollment Key.

Requirements:

1. The Nodegrid appliance needs to be on v4.2.13 or newer. If upgrade is needed, please follow these steps: How Do I Upgrade the Software of My Nodegrid? 
2. If unit has TPM 1.2, TPM needs to be enabled: How to: enable TPM on BIOS
   

Using Claim ID:

Recommended method for new and replacement systems.

The steps are described in How to: Add Devices to your ZPE Cloud company using Claim ID.

Using Transfer Key:

The steps are described in How to: Add Devices to your ZPE Cloud company using Transfer Key.

Using Enrollment Key & Customer Code:

The steps are described in How to: Add Devices to your ZPE Cloud company using Customer Code and Enrollment key.

• Related Articles

• Company's Firewall configuration: what resources need to be opened in Firewall for the Nodegrid appliances to connect to ZPE Cloud?

  ZPE Cloud uses some IP addresses and hostnames that may be blocked by the Firewall rules. This can prevent the Nodegrid appliances from connecting to the Cloud and/or untilizing specific ZPE Cloud fgeatures. ZPE Cloud utilizes TCP port 443 for ...

• How to Manually Add Network Devices with SSH or Telnet Support to NodeGrid via CLI

  Access your NodeGrid via telnet, ssh, or console, and log in as admin. Type the following commands to add Console device to NodeGrid: [admin@nodegrid /]# add /settings/devices/ [admin@nodegrid {devices}]# set name=<device_name> [admin@nodegrid ...

• How to Manually Add NetApp Storage Devices to NodeGrid via CLI

  Access your NodeGrid via telnet, ssh, or console, and log in as admin. Type the following commands to add a NetApp device to NodeGrid: [admin@nodegrid /]# add /settings/devices/ [admin@nodegrid {devices}]# set name=<netapp_server> [admin@nodegrid ...

• How to Auto-Discover and Add Network Devices with SSH or Telnet Support to NodeGrid

  Introduction:       Use case for the Network scanning of IP Devices is to add all the IP managed devices into the Nodegrid Manager for managing all the devices.  It can also be used to detect IP usage in the network.  (This detection of IP device is ...

• How to Auto-Discover and Add NetApp Storage Devices to NodeGrid

  In order to discover NetApp devices on the network, first you need to add at least one netapp type manually. See the article "How to manually add NetApp storage devices to NodeGrid" for details.   Then, follow the steps below: Access the NodeGrid via ...