How to: Add Devices to your ZPE Cloud company using Transfer Key

ZPE Cloud is a powerful tool for managing your Nodegrid devices, and one of the methods to add a device to your company in ZPE Cloud is to use a unique 45-digit Transfer Key, which is a unique identifier assigned to a device or list of devices. Here's how to add a single or multiple devices to your company in ZPE Cloud using Transfer Key:

Here's how you can do it:

Obtain the Transfer Key with ZPE support. You will need to contact ZPE support and provide them with the serial numbers of the devices you want to add. Once ZPE verifies that the devices are available for transfer, they will provide you with a Transfer key.
Log in to ZPE Cloud as an admin, and go to the Devices > Available tab.
Under the Devices > Available tab, click to Add by Key.
You'll see a form is opened to provide the Transfer Key. Enter the Transfer Key and click Save.
You'll see a confirmation message that the devices have been loaded into your company in ZPE Cloud. The devices will now appear in the Devices > Available tab.
Select the devices that you just added and click Enroll. This will enroll the devices in ZPE Cloud.
Once you've enrolled the devices, it will be listed in the Devices > Enrolled tab. You're all set to start using it!

Please note that adding a device by Transfer Key is one of the methods used to add multiple devices at once, but there are other ways to add devices to ZPE Cloud as well, described in the following article How to Add Devices to a Company in ZPE Cloud. However, adding a device by Transfer Key is often the easiest and most straightforward method for adding multiple devices to a ZPE Cloud company.

It's important to note that adding a device by Transfer Key can only be done through ZPE Cloud and not via CLI or Shell. If you have any questions or need assistance with this process, don't hesitate to reach out to our support team.

Here're screenshots to help in the visualization of the process:

Form to add a device by Transfer Key under Devices > Available tab, that can be used in Steps 2, 3 and 4.

We hope this guide was helpful in adding your Nodegrid device to your company in ZPE Cloud. If you have any questions or encounter any issues during the process, please refer to our knowledge base for more information. If you still need assistance, don't hesitate to contact our support team and we'll be happy to help you.