Downloading Firmware Update

Downloading Firmware Update

Note: If you need a login for ZPE's Sharefile service, please contact ZPE Support.  Be sure to follow the recommended upgrade paths: Nodegrid OS Upgrade Path

In a browser open https://zpe.sharefile.com/

Login in


Navigate to the "Shared Folders" directory


Open "Released Software Download"


Click on version you are upgrading to


Read release note


Select the iso and the iso.md5 files


Click download


After the download is complete, run a checksum on the iso file to confirm that it downloaded properly.  Then use these steps to upgrade: How Do I Upgrade the Software of My Nodegrid?

    • Related Articles

    • Installing Firmware for the LTE Modem (Sierra EM7565)

      Note: If cellular connectivity with the current SIM(s) and firmware provides reliable connectivity, there is no need to update the firmware. We only recommend updating firmware to potentially resolve technical issues. The link to download the latest ...

    • How Do I Upgrade the Software of My Nodegrid?

      Note: Be sure to follow the recommended upgrade paths: Nodegrid OS Upgrade Path To download the required ISOs: Downloading Firmware Update Steps for the Nodegrid software upgrade via WebUI From browsers, log into NodeGrid unit Click on "System" Click ...

    • Modem firmware files and upgrade process

      As of June 01, 2020, all units shipped by ZPE should have the following firmware versions installed in each modem: SWI9X50C_01.07.02.00_ATT_002.008_004 SWI9X50C_01.08.04.00_GENERIC_002.012_001 SWI9X50C_01.08.04.00_VERIZON_002.015_002 Upgrading ...

    • AT&T SIM is not connecting to LTE or losing connection unexpectedly on Sierra EM7565 modem

      Sierra EM7565 modems where the AT&T carrier profile is utilizing the 01.14.02.00 firmware may experience connectivity issues including a failure to connect or unexpected modem resets. In Nodegrid OS, this profile is identified as 01.14.02.00_ATT. ...

    • Nodegrid upgrade through Redhat server

      Ansible can be used to upgrade Nodegrid device to newer version from server ( Redhat in this case ). Make sure ISO file has been copied to /etc/ansible/Firmware/ folder. First, one needs to create template to be copied on remote Nodegrid device. ...