How to Manually Add Service Processors to NodeGrid via CLI

            Access your NodeGrid via telnet, ssh, or console, and log in as admin.

            Type the following commands to add Service Processor device to NodeGrid:

            [admin@nodegrid /]# add /settings/devices/

            [admin@nodegrid {devices}]# set name=<server_name>

            [admin@nodegrid {devices}]# set ip_address=<server_IP>

            [admin@nodegrid {devices}]# set type=<TAB>

            cimc_ucs                             idrac6          kvm_mpu             pdu_raritan

            console_server_acs              ilo                netapp                  pdu_servertech

            console_server_acs6000       ilom             pdu_apc                virtual_console_kvm

            console_server_lantronix      imm              pdu_baytech         virtual_console_vmware

            console_server_opengear     ipmi_1.5        pdu_enconnex             

            device_console                    ipmi_2.0        pdu_mph2                 

            drac                                   kvm_dsr         pdu_pm3000               

            [admin@nodegrid {devices}]# set type=<service_processor_type>

            [admin@nodegrid {devices}]# set username=<admin_user>

            [admin@nodegrid {devices}]# set credential=set_now

            [admin@nodegrid {devices}]# set password=<admin_user_password>

            [admin@nodegrid {devices}]# set mode=enabled

            [admin@nodegrid {devices}]# save


            Note: hitting <TAB> completes the command and show possible options

            Updated: 18 Oct 2016 10:18 AM
            Help us to make this article better
            0 0