Can I Cascade NodeGrid Serial Console Units?

Can I Cascade NodeGrid Serial Console Units?

NodeGrid Serial Console (NSC) serial console server is able to share network ports with fellow devices, sharply reducing network switch port usage for OOB device management. This new port saving feature is already reliably and securely saving many valuable network switch Ethernet ports, reducing cat5/6 cabling usage and shaving expenses worldwide.

NodeGrid Serial Console cascades, or daisy chains, network ports as shown below by implementing a network bridge between ports ETH0 and ETH1. In this configuration several NSC units can be used in cascade mode, all sharing the same network switch port, saving a physical port on each switch. Instead of occupying multiple ports on a master network switch, we can share one port among multiple NSC units. A typical network layout before cascading ports is shown below, along with a port-saving cascaded network layout.

Cascading NodeGrid Serial Console layout illustration


In cascade configuration, each NSC still has its own dedicated IP address (DHCP or Static) allowing for independent system administrator access. At the same time, cascading console units saves valuable network switch ports for better uses.

NodeGrid Serial Console’s powerful multi-core processor mitigates any performance impacts from handling cascaded network traffic.

On top of this configuration, it also possible to run Cloud Clustering (a NodeGrid Feature license) for a 360° view of all ports anywhere in the world.


Cloud Clustering


Multiple NodeGrid nodes can easily manage thousands of IT devices. NodeGrid provides scaled access and control of NodeGrid-managed data centers in true cloud cluster configuration. Each node securely and resiliently communicates with other nodes.

A single NodeGrid node provides access and control of up to 1,000 physical and virtual managed devices. NodeGrid insures efficient, fast provision of services to these devices by way of live connections. These live connections provide an active conduit of data collection to notify you immediately of user-customizable alarm conditions on a 24 x 7 basis.

Please refer to the User Manual for information on how to configure cascading and cloud clustering on NodeGrid.

    • Related Articles

    • Nodegrid Serial Console: Pinouts, Cables and Connectors

      The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout).  NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
    • How to Telnet and SSH to the Nodegrid Serial Ports

      Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...
    • Power Control within Serial Session

      Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...
    • How to Configure Network Bridge on the Nodegrid Serial Console

      Nodegrid Serial Console cascades, or daisy chains, network ports by implementing a network bridge between ports ETH0 and ETH1. In this configuration several NSC units can be used in cascade mode, all sharing the same network switch port, saving a ...