Which extended cellular modem antennas have been tested with Nodegrid appliances

Which extended cellular modem antennas have been tested with Nodegrid appliances


This extended cellular modem antenna has been tested by ZPE with the cellular modems used in Nodegrid appliances successfully:

Magneto MB.250.B Three Way Base Mount for LTE or Wi-Fi MIMO 2*2 antennas
ZPE Systems also resells these via SKU: MB.250.B

Yagi Directional Antenna 3G/4G/LTE 9dBi 800MHz-960MHz and 1.7-2.5GHz SMA Male cable to TS-9 adapter
 
These products can be purchased directly through the manufacture or their authorized resellers.

    • Related Articles

    • Nodegrid appliances certified with US cellular carriers

      ZPE Systems's appliances can work with any carrier in the world for 4G/LTE/5G connection, and in US ZPE is certified with the following carriers: Any questions? Send an email to support@zpesystems.com.

    • Speedtest validation and modem testing

      There are a couple of ways to address the speedtest question: You could add speedtest.net as a managed device If you’re cool with docker you could get speedtest-cli from gists and install the docker container, failover to cellular, run the ephimeral ...

    • What signal levels are required for LTE cellular connections?

      The exact thresholds for maintaining an LTE connection or higher data speeds will vary per carrier. The charts below provides general guidelines. In order to see the current signal levels: Log into the Nodegrid appliance as admin Access the root ...

    • How to prevent cellular modem from connecting using 3G

      The Sierra EM7565 modem available in many Nodegrid devices supports both 4G and 3G connectivity. By default, the modem will first try to connect to relevant 4G networks available and only fall back to 3G when connecting via 4G fails. The result is ...

    • How To: Locating IMEI on Nodegrid

      You have a couple of ways to get that data: WebUI Go to “Tracking->Devices->Wireless Modem” then click hyperlink for modem (mine is Channel-A) CLI Log into console of Nodegrid Run “shell sudo su –“ command to drop to linux shell Run “mmcli -L” ...