What is the NodeGrid serial ports pinout?

What is the NodeGrid serial ports pinout?

NodeGrid Serial Console has 3 models in regards to the RJ45 pinouts:

1. NSC-Txx: Legacy pinout

2. NSC-TxxR: Straight-Cisco pinout

3. NSC-TxxS: Auto-Sense (it automatically detects serial devices' pinout for Legacy or Straight-Cisco).

Note: xx can be 16, 32, 48, or 96 (except for TxxS which is up to 48 ports)


    • Related Articles

    • Nodegrid Serial Console: Pinouts, Cables and Connectors

      The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout). NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
    • Devices Pinout with Nodegrid serial port

      The table below shows the configuration of the cable or adapter that you can make as the target device that you are connecting to Nodegrid serial ports (Cisco pinout) has proprietary pinout on their console port. 1. Nodegrid - Dell EqualLogic Pinout ...
    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
    • How to troubleshoot RS232 serial connections

      Navigate to Tracking :: Devices :: Serial Statistics Look for CD or CTS signals These both indicate that the target device is ready Typically at least one is active, though some vendors do not send either Note the RX Bytes and reload the page to see ...
    • How to Telnet and SSH to the Nodegrid Serial Ports

      Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...