What is the APN for my Nodegrid SR to connect to 4G/LTE?

What is the APN for my Nodegrid SR to connect to 4G/LTE?

The Nodegrid SR appliances support the cellular connection from Verizon and AT&T, as well as other carriers.

Depending on the data plan you may have acquired from the carrier, e.g., Public Static or Dynamic Private IP, the APN may differ. If the typical APNs are not successful, please contact your cellular carrier to get that information, and set it in Nodegrid's Cellular connection.  Below are some APNs that were successfully used by ZPE customers:

Verizon
      Private dynamic IP
  1. vzwinternet

      Public static IP (APN's per region)
            1. ne01.vzwstatic (North East)
            2. nw01.vzwstatic (North West)
            3. so01.vzwstatic (south)
            4. mw01.vzwstatic (Midwest)
            5. we01.vzwstatic (West)


AT&T
      Private dynamic IP:
  1. Broadband
  2. NXTGENPHONE 
  3. m2m.com.attz
     

      Public static
  1. i2gold


T-Mobile
      Private dynamic IP
  1. fast.t-mobile.com
  2. internet.telekom (Germany)

      Public static
  1. b2b.static
 

    • Related Articles

    • LTE Modem : Current Band, Cell tower and Non-cached signal quality Information

      In Nodegrid, if one needs to run 4G and 5G LTE modem speed tests, mmcli command can be used with different parameters. One needs to use modem specific commands to retrieve the following information, 1) The current band the modem is connected to ...

    • How to: Configure Failover for LTE connection

      Assuming that you have already configured your LTE connection (How to: Configure a LTE/GSM Network Connection), it's most likely that you don't want it to be online/active, as it may incur unnecessary charges. For this reason, we will be configuring ...

    • What signal levels are required for LTE cellular connections?

      The exact thresholds for maintaining an LTE connection or higher data speeds will vary per carrier. The charts below provides general guidelines. In order to see the current signal levels: Log into the Nodegrid appliance as admin Access the root ...

    • Nodegrid SR OOB Network performance

      Introduction: The Nodegrid can be used as the gateway to the OOB network OOB-LAN to segregate from the production network. In doing so, it is necessary to know the performance of the OOB-LAN to validate if the network is adequate for all the devices ...

    • Nodegrid Manager Installation in ESXi 5

      Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process:  Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...