USB Modems Validated by ZPE Systems

USB Modems Validated by ZPE Systems

Even though NodeGrid has support for a wide range of wireless modems, these are the models we validated so far:
  • Verizon USB Modem U620L
  • AT&T Beam USB Modem
  • Sierra Wireless AirLink ES450 (carrier: Verizon)

    • Related Articles

    • Network Failover with Huawei E3276 USB Wireless Modem

      The E3276 USB wireless modem reports itself as a network device. So you will have to add a network connection in Nodegrid that binds to it. Here are the steps: 1. Login as admin in the Web UI and browse to Network, then Connections. Click Add and ...
    • Network Configuration via CLI

      Example of configuring the ETH0 interface via CLI (please, replace the network values with your own information). Log in as admin to the Nodegrid console port or HDMI Type the following commands (in bold): [admin@nodegrid /]# cd ...
    • How to Configure Network Bridge on the Nodegrid Serial Console

      Nodegrid Serial Console cascades, or daisy chains, network ports by implementing a network bridge between ports ETH0 and ETH1. In this configuration several NSC units can be used in cascade mode, all sharing the same network switch port, saving a ...
    • How to Enable Network Bonding on the Nodegrid Serial Console

      Below are the steps to configure network bonding with ETH0 and ETH1. WebUI Open a browser, enter the Nodegrid Serial Console IP/hostname, and log in as admin Go to Network :: Connections page Click on Add, and fill out the form as follows: Enter a ...
    • USB Passthrouh Feature - Nodegrid

      USB Passthrouh This feature requires the latest USB controller, currently available on new NSR USB modules "year 2021 and later. It is also available on newer models of BSR and GSR. New models for BSR and GSR that support 5G with 5 Antenna holes will ...