USB device types support in Nodegrid
The following usb devices types are currently supported by Nodegrid appliances:
USB Device Type | Vendor |
USB Serial | FTDI, CP2105, CP210X |
USB KVM | ZPE's KVM-U01 - KVM over USB dongle (VGA, USB kb, USB mouse) |
USB Sensor | ZPE's THS-U01 - temperature & humidity |
USB Analog Modem | Zoom, USRobotics |
USB Cellular Modem | USB620L, USB730L |
USB 1G Ethernet | Any USB 3.0 Gigabit Ethernet adapter. |
USB SFP Ethernet | Winyao USB1000F USB 3.0 Gigabit Fiber adapter |
USB WiFi | Wireless Network adapter for Linux (TP-Link TL-WN722N) |
USB Storage | Any USB flash drive |
Please, note that these devices above have drivers for Linux, and Nodegrid OS has support for them, however, some newer models may have different driver versions and may not work as expected.
For those, please contact
support@zpesystems.com for verification and Feature Requests to that the device's support.
Related Articles
How to: Enable ZPE Cloud in a Nodegrid device
ZPE Cloud is a powerful platform that allows you to manage your Nodegrid devices from anywhere in the world. In order to use the benefits of managing your Nodegrid devices through ZPE Cloud, you need to enroll the Nodegrid device to your company and ...
Nodegrid Serial Console: Pinouts, Cables and Connectors
The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout). NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
NodeGrid Monitoring Aggregation Settings
Here is how to configure a monitoring aggregation. 1) Make sure you have a monitoring license installed. If you don't have one, add one via System > License 2) Make sure you have the devices you want to aggregate configured and monitoring is enabled. ...
How to Configure Nodegrid Serial Ports
To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below. WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
Nodegrid Manager Installation in ESXi 6
Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process: Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...