THS-U01: Temperature and Humidity USB sensor current reading values

The current reading for THS-U01 can be found under: Tracking :: HW Monitor :: USB Sensors

• Related Articles

• How to: Add OpenSearch Temperature visualization to Nodegrid

  The Dashboard (WebUI only) allows visual presentations of Event activities, Managed Device details, and data monitoring. Multiple dashboards can be created for different purposes. For example, one to monitor managed device data points (i.e., Power ...

• Nodegrid Boot from USB media

  Nodegrid Boot from USB media Overview In some cases, it might be required to recover a Nodegrid unit. The Nodegrid platform offers different methods for this one is to create a USB boot media. This can be used to recover a unit if no or limited ...

• USB device types support in Nodegrid

  The following usb devices types are currently supported by Nodegrid appliances:  USB Device Type  Vendor  USB Serial  FTDI, CP2105, CP210X  USB KVM  ZPE's KVM-U01 - KVM over USB dongle (VGA, USB kb, USB mouse)  USB Sensor  ZPE's THS-U01 - temperature ...

• USB Passthrouh Feature - Nodegrid

  USB Passthrouh This feature requires the latest USB controller, currently available on new NSR USB modules "year 2021 and later. It is also available on newer models of BSR and GSR. New models for BSR and GSR that support 5G with 5 Antenna holes will ...

• Deleting extra USB port for quad Uart

  Introduction: When using the USB connections for serial access, with a quad UART only a few ports are used. It is a good idea to remove extra ports defined so that extra licenses can be freed. For the quad UART 4 licenses are used when it is ...