LTE Modem : Current Band, Cell tower and Non-cached signal quality Information
In Nodegrid, if one needs to run 4G and 5G LTE modem speed tests, mmcli command can be used with different parameters. One needs to use modem specific commands to retrieve the following information, 1) The current band the modem is connected to ...
USB Modems Validated by ZPE Systems
Even though NodeGrid has support for a wide range of wireless modems, these are the models we validated so far: Verizon USB Modem U620L AT&T Beam USB Modem Sierra Wireless AirLink ES450 (carrier: Verizon)
Network Failover with Huawei E3276 USB Wireless Modem
The E3276 USB wireless modem reports itself as a network device. So you will have to add a network connection in Nodegrid that binds to it. Here are the steps: 1. Login as admin in the Web UI and browse to Network, then Connections. Click Add and ...
How antennas should be connected to M.2 modems installed in an NSR
To prevent interference, the antenna connectors for each channel are split onto opposite sides of the module. This may cause confusion as it is a reasonable assumption that the connectors are associated with the LEDS below. It is critical that the ...
USB device types support in Nodegrid
The following usb devices types are currently supported by Nodegrid appliances: USB Device Type Vendor USB Serial FTDI, CP2105, CP210X USB KVM ZPE's KVM-U01 - KVM over USB dongle (VGA, USB kb, USB mouse) USB Sensor ZPE's THS-U01 - temperature ...