Size of the DC terminals on Nodegrid Serial Console (NSC) appliances

• Related Articles

• Nodegrid Serial Console: Pinouts, Cables and Connectors

  The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout).  NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...

• How to Telnet and SSH to the Nodegrid Serial Ports

  Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...

• How to Configure Nodegrid Serial Ports

  To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...

• Power Control within Serial Session

  Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...

• NSR and NSC DC supply ring terminal sizes

  The NSR and NSC are designed with Dual DC supply and the connections for the device with DC supply are as shown in the image The terminals can be connected with ring terminals of size M3#4 or M4#8 which is the same size of the screws