SFP Transceivers

What SFP transceivers are supported by Nodegrid appliances?

The Nodegrid appliances with SFP+ ports can support any Generic or Branded transceivers, copper and fiber.
Below are the list of transceivers that were validated by ZPE Systems as well as our customers:
VendorPart NumberDescriptionConnector / Type
Copper SFP transceivers that support 10/100/1000 speedsZPE SystemsZSFP-GB-GE-1GTEthernet: 10/100/1000BASE-T SFP, 100m
* Required for GSR, HSR, NSR Lite & NSCP in order to support 1G copper		RJ-45
FiberstoreSFP-GB-GE-T 10/100/1000Ethernet: 10/100/1000BASE-T SFP, 100m
* Required for GSR, HSR, NSR Lite & NSCP in order to support 1G copper		RJ-45
CiscoGLC-TEEthernet: 10/100/1000BASE-T SFP, 100mRJ-45
Copper SFP transceivers that support 1G speedZPE SystemsZSFP-GB-GE-TEthernet: 1000BASE-T SFP, 100mRJ-45
* Required for NSC & LSR
FiberstoreSFP-GE-TEthernet: 1000BASE-T SFP, 100mRJ-45
* Required for NSC & LSR
FinisarFCLF-8521-3Ethernet: 1000BASE-T SFP, 100mRJ-45
CiscoSFP-GE-TEthernet: 1000BASE-T SFP, 100mRJ-45
Fiber SFP transceivers that support 1G speedZPE SystemsZSFP-1G-SX-851000BASE-SX SFP, 850nm Multi-Mode, 550mSX
ZPE SystemsZSFP-1G-LH-311000BASE-EX SFP, 1310nm Single-Mode, 40kmEX
ZPE SystemsZSFP-1G-LX-311000BASE-LX/LH SFP, 1310nm Single-Mode, 40kmLH
ZPE SystemsZ5690231000BASE-SX SFP, 550M Multi-ModeSX
ZPE SystemsZ5690241000BASE-LX/LH SFP, 2km Multi-ModeLX/LH
ZPE SystemsZ5690251000BASE-LX/LH SFP, 10km Single-ModeLX/LH
ZPE SystemsZ5690261000BASE-EX SFP, 40km Single-ModeEX
FiberstoreSFP-1G-LX-311000BASE-LX SFP, 1310nm Single-Mode, 10kmDuplex LC
CiscoGLC-SX-MM1000BASE-SX SFP, 850nm Multi-Mode, 550mDuplex LC
TRENDnetTEG-MGBSX1000BASE-SX SFP, 850nm Multi-Mode, 550mDuplex LC
Fiber SFP transceivers that support 10G speedZPE SystemsZSFP-10G-LR-3110G BASE-LR SFP+, 1310nm Single-Mode 10kmDuplex LC
ZPE SystemsZSFP-10G-SR-8510G BASE-SR SFP+, 850nm Multi-Mode, 300mDuplex LC
Bidirectional Fiber SFP transceiversFSSFP-GE-BXSFP 1000BASE-BX-U BiDi 1310nm-TX/1490nm-RX 10kmSimplex LC
FSSFP-GE-BXSFP 1000BASE-BX-D BiDi 1490nm-TX/1310nm-RX 10kmSimplex LC
Approved NetworksOP-SFP-BX34-201000BASE-BX-U BiDi SFP 1310 nm-TX/1490 nm-RX 10-20 kmSimplex LC
Approved NetworksOP-SFP-BX43-201000BASE-BX-D BiDi SFP 1490nm-TX/1310nm-RX 10-20kmSimplex LC
VDSL transceiverZPE SystemsZSFP-VDSL2VDSL2 SFP ModemRJ-11
Notes:
  1. The GSR, HSR, NSCP and NSR Lite have additional restrictions:
    1. If more than one transceiver is connected, both transceivers need to be the same type, i.e. both copper or both fiber.
    2. If 1G fiber is used, the auto-negotiation needs to be disabled in the link partner.
    3. Bidirectional Fiber SFP transceivers require Nodegrid OS v5.8.21, v5.10.16, or v6.0.12 or newer
  2. Older Nodegrid OS versions may not be able to support all of these transceivers.  To verify if a specific transceiver is supported on a specific version, the dmesg logs can be reviewed while the transceiver is installed to confirm there are no related errors.

Contact our Sales team, sales@zpesystems.com, to inquiry the transceivers that ZPE Systems carries.

    • Related Articles

    • SFP network interface missing

      When an unsupported SFP transceiver is connected to an Intel ethernet controller, the network interface will no longer appear for many system commands. Here are the known symtoms for this issue: The affected network interface will not pass any ...

    • Add Nodegrid appliances and its targets into the Nodegrid OS

      Description: In this article, we will show you how to add Nodegrid appliances and its target devices into the Nodegrid OS. In the resulting architecture, from a given Nodegrid OS, you access a set of Nodegrid appliances as Managed Devices and their ...

    • Nodegrid appliances certified with US cellular carriers

      ZPE Systems's appliances can work with any carrier in the world for 4G/LTE/5G connection, and in US ZPE is certified with the following carriers: Any questions? Send an email to support@zpesystems.com.

    • What is the Nodegrid NSC Appliances' Harmonized Code and ECCN Number?

      The Nodegrid family of appliances have the following HS code and ECCN information: Nodegrid Serial Console (NSC) Nodegrid Bold (NGB) Nodegrid [CI] (NCI) Nodegrid Flex (NFX) Nodegrid Service Processor (NSP) Nodegrid USB (NGU) Harmonized code HS ...

    • What is the Nodegrid NSR Appliances' Harmonized Code and ECCN Number?

      The Nodegrid SR family of appliances have the following HS code and ECCN information: Nodegrid Services Router (NSR) Nodegrid Gate SR (GSR) Nodegrid Bold SR (BSR) Nodegrid Link SR (LSR) Harmonized code HS 8517.18.0000 ECCN number is 5A002 ZPE's CCATS ...