NodeGrid T48S Visio stencil
The NodeGrid T48S stencil is available here:
If you need stencil for other products, please, contact support@zpesystems.com.
Related Articles
How to Configure Nodegrid Serial Ports
To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below. WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
Nodegrid Serial Console: Pinouts, Cables and Connectors
The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout). NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
Power Control within Serial Session
Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...
Exploring Data Points
This section will describe how you can verify that we are actually persisting the data collected and to learn more about the data being collected. This knowledge will be helpful in the Creating a Visualization article. First, make sure that you have ...
Nodegrid Manager Installation in ESXi 6
Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process: Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...