What is the NodeGrid Serial Console Power specification?
The NodeGrid Serial Console has the following power specs:
Single or Dual AC: 100–240 VAC, 50/60 Hz @ 0.9A max with no more than 45W of Power consumption.
Power Control within Serial Session
Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...
How to Configure Nodegrid Serial Ports
To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below. WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
Nodegrid Serial Console: Pinouts, Cables and Connectors
The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout). NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
How to Telnet and SSH to the Nodegrid Serial Ports
Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...
Nodegrid Manager Installation in ESXi 6
Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process: Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...