Nodegrid appliances certified with US cellular carriers
ZPE Systems's appliances can work with any carrier in the world for 4G/LTE/5G connection, and in US ZPE is certified with the following carriers:
Any questions? Send an email to support@zpesystems.com.
Related Articles
What signal levels are required for LTE cellular connections?
The exact thresholds for maintaining an LTE connection or higher data speeds will vary per carrier. The charts below provides general guidelines. In order to see the current signal levels: Log into the Nodegrid appliance as admin Access the root ...What is the APN for my Nodegrid SR to connect to 4G/LTE?
The Nodegrid SR appliances support the cellular connection from Verizon and AT&T, as well as other carriers. Depending on the data plan you may have acquired from the carrier, e.g., Public Static or Dynamic Private IP, the APN may differ. If the ...Which extended cellular modem antennas have been tested with Nodegrid appliances
This extended cellular modem antenna has been tested by ZPE with the cellular modems used in Nodegrid appliances successfully: Magneto MB.250.B Three Way Base Mount for LTE or Wi-Fi MIMO 2*2 antennas ...Nodegrid Bold SR and Gate SR are FirstNet certified
The Nodegrid Bod SR (BSR) and Gate SR (GSR) was granted the FirstNet Certificates issued by AT&T Mobility LLC. The GSR and BSR use the modem module EM120R-GL by Quectel. This device / module supports and was tested for the following FirstNet ...Which Countries are Nodegrid Appliances Certified in for Cellular
This list applies to Nodegrid Serial Console Plus (NSCP), Net Services Router (NSR), Gate SR (GSR), Link SR (LSR), and Bold SR (BSR): Austria Belgium Brazil Bulgaria Burma (Myanmar) Canada Croatia Cyprus Czech Republic Denmark Equatorial Guinea ...