Nodegrid Fan and Expansion Cards Swappable

Nodegrid Fan and Expansion Cards Swappable

Nodegrid Services Router and Nodegrid Serial Console ( S series ) have air exhaust or 
air intake fans ( swappable, front-to-back or back-to-front) to cool down the device. 
Fans will be at the back side (back panel).

The fan is not hot swappable. The devices must be power off before servicing or swapping.
Online insertion and removal is not possible.

Nodegrid Services Router has different expansion cards depends on the requirements.
Expansion cards are also not hot swappable. So device must be power off while swapping.

    • Related Articles

    • How to control FAN speed in Nodegrid Services Router

      Nodegrid Services Router is a modular open platform appliance. NSR unit has air exhaust or air intake fans ( swappable, front-to-back or back-to-front) to cool down the device. Fans will be at the back side (back panel). Units are actively cooled by ...

    • How to: Add OpenSearch Temperature visualization to Nodegrid

      The Dashboard (WebUI only) allows visual presentations of Event activities, Managed Device details, and data monitoring. Multiple dashboards can be created for different purposes. For example, one to monitor managed device data points (i.e., Power ...

    • How to format, partition and mount additional hard disk expansion to the Nodegrid OS

      Overview With the exception of the NSR, additional hard drive expansion disks need to be formatted, partitioned, and mounted to the Nodegrid OS. Below here are the steps required to add expansion hard disk drives to GSR, HSR, BSR platforms. # Command ...

    • NodeGrid TxxS air flow direction

      NodeGrid Serial Console S series The NodeGrid TxxS has 2 cooling fans to dissipate heat from the unit. There are 2 air flow configurations: -B : Back to Front - meaning Air Out (air exhaust) -F : Front to Back - meaning Air In (air intake)  The fans ...

    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...