My NodeGrid is Reporting Only Total Power From Eaton UPS
If you have added an Eaton UPS to the NodeGrid as 'device console', and enabled Monitoring, but it is reporting only Total Power - and not getting other information such as humidity, battery level, etc., make sure that the Management setting is correct:
- For Eaton UPS, select SNMP version 1
- Monitoring template is ups_eaton
Related Articles
Power Control within Serial Session
Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...
How to Configure Nodegrid Serial Ports
To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below. WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
How to Add Users to NodeGrid
Adding new users via WebUI Log in as admin to the NodeGrid WebUI Click on Local Accounts A list of all users will be displayed on the User Names screen; Click on Add and the Local User Information screen will be displayed; Type a new user name and ...
Nodegrid Manager Installation in ESXi 5
Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process: Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...
Nodegrid Manager Installation in ESXi 6
Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process: Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...