Initial Configuration of a Nodegrid Appliance via the Console Port

Initial Configuration of a Nodegrid Appliance via the Console Port

Configuration of a Nodegrid Appliance via the Console Port lets you  perform the initial configuration easily and reliably.

Learn how to configure a Nodegrid Appliance through the console port on ZPE Systems' Nodegrid Manager

    • Related Articles

    • Initial Configuration of a Nodegrid Appliance via the Console Port

      Configuring a Nodegrid Appliance through the console port lets you perform the initial configuration easily via CLI. Once the Nodegrid platform is turned on we can see the startup process of Nodegrid device via console port connected to the Nodegrid. ...
    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
    • Nodegrid Serial Console: Pinouts, Cables and Connectors

      The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout).  NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
    • Network Configuration via CLI

      Example of configuring the ETH0 interface via CLI (please, replace the network values with your own information). Log in as admin to the Nodegrid console port or HDMI Type the following commands (in bold): [admin@nodegrid /]# cd ...
    • Initial Configuration of a Nodegrid Appliance via the Console Port