Access your NodeGrid via telnet, ssh, or console, and log in as admin.

Type the following commands to add Service Processor device to NodeGrid:

[admin@nodegrid /]# add /settings/devices/

[admin@nodegrid {devices}]# set name=<server_name>

[admin@nodegrid {devices}]# set ip_address=<server_IP>

[admin@nodegrid {devices}]# set type=<TAB>

cimc_ucs                             idrac6          kvm_mpu             pdu_raritan

console_server_acs              ilo                netapp                  pdu_servertech

console_server_acs6000       ilom             pdu_apc                virtual_console_kvm

console_server_lantronix      imm              pdu_baytech         virtual_console_vmware

console_server_opengear     ipmi_1.5        pdu_enconnex             

device_console                    ipmi_2.0        pdu_mph2                 

drac                                   kvm_dsr         pdu_pm3000               

[admin@nodegrid {devices}]# set type=<service_processor_type>

[admin@nodegrid {devices}]# set username=<admin_user>

[admin@nodegrid {devices}]# set credential=set_now

[admin@nodegrid {devices}]# set password=<admin_user_password>

[admin@nodegrid {devices}]# set mode=enabled

[admin@nodegrid {devices}]# save

Note: hitting <TAB> completes the command and show possible options