Access your NodeGrid via telnet, ssh, or console, and log in as admin.

Type the following commands to add a PDU device to NodeGrid:

[admin@nodegrid /]# add /settings/devices/

[admin@nodegrid {devices}]# set name=<pdu>

[admin@nodegrid {devices}]# set ip_address=<pdu_IP>

[admin@nodegrid {devices}]# set type=<TAB>

cimc_ucs                            idrac6         kvm_mpu                  pdu_raritan

console_server_acs             ilo               netapp                      pdu_servertech

console_server_acs6000      ilom            pdu_apc                  virtual_console_kvm

console_server_lantronix     imm            pdu_baytech           virtual_console_vmware

console_server_opengear    ipmi_1.5      pdu_enconnex             

device_console                   ipmi_2.0      pdu_mph2                 

drac                                   kvm_dsr      pdu_pm3000               

[admin@nodegrid {devices}]# set type=<pdu_xxxx>

[admin@nodegrid {devices}]# set username= <admin_user>

[admin@nodegrid {devices}]# set credential=set_now

[admin@nodegrid {devices}]# set password= <admin_user_password>

[admin@nodegrid {devices}]# set mode=enabled

[admin@nodegrid {devices}]# save

Note: hitting <TAB> completes the command and show possible options