Access your NodeGrid via telnet, ssh, or console, and log in as admin.

Then, type the following commands to add a KVM device to NodeGrid:

[admin@nodegrid /]# add /settings/devices/

[admin@nodegrid {devices}]# set name=<kvm>

[admin@nodegrid {devices}]# set ip_address=<kvm_IP>

[admin@nodegrid {devices}]# set type=<TAB>

cimc_ucs                             idrac6            kvm_mpu           pdu_raritan

console_server_acs              ilo                  netapp                 pdu_servertech

console_server_acs6000       ilom               pdu_apc               virtual_console_kvm

console_server_lantronix       imm              pdu_baytech         virtual_console_vmware

console_server_opengear      ipmi_1.5        pdu_enconnex             

device_console                     ipmi_2.0        pdu_mph2                 

drac                                     kvm_dsr      pdu_pm3000               

[admin@nodegrid {devices}]# set type=<kvm_xxxx>

[admin@nodegrid {devices}]# set username= <admin_user>

[admin@nodegrid {devices}]# set credential=set_now

[admin@nodegrid {devices}]# set password= <admin_user_password>

[admin@nodegrid {devices}]# set mode=enabled

[admin@nodegrid {devices}]# save

Note: hitting <TAB> completes the command and show possible options