How To: Locating IMEI on Nodegrid
You have a couple of ways to get that data:
- WebUI
- Go to “Tracking->Devices->Wireless Modem” then click hyperlink for modem (mine is Channel-A)
- CLI
- Log into console of Nodegrid
- Run “shell sudo su –“ command to drop to linux shell
- Run “mmcli -L” command to see which modem number entry (in my case it’s ‘0’)
- Run “mmcli -m 0” to list modem details (equipment ID=IMEI)
Related Articles
What signal levels are required for LTE cellular connections?
The exact thresholds for maintaining an LTE connection or higher data speeds will vary per carrier. The charts below provides general guidelines. In order to see the current signal levels: Log into the Nodegrid appliance as admin Access the root ...Nodegrid appliances certified with US cellular carriers
ZPE Systems's appliances can work with any carrier in the world for 4G/LTE/5G connection, and in US ZPE is certified with the following carriers: Any questions? Send an email to support@zpesystems.com.Speedtest validation and modem testing
There are a couple of ways to address the speedtest question: You could add speedtest.net as a managed device If you’re cool with docker you could get speedtest-cli from gists and install the docker container, failover to cellular, run the ephimeral ...How to: Configure Failover for LTE connection
Assuming that you have already configured your LTE connection (How to: Configure a LTE/GSM Network Connection), it's most likely that you don't want it to be online/active, as it may incur unnecessary charges. For this reason, we will be configuring ...Which extended cellular modem antennas have been tested with Nodegrid appliances
This extended cellular modem antenna has been tested by ZPE with the cellular modems used in Nodegrid appliances successfully: Magneto MB.250.B Three Way Base Mount for LTE or Wi-Fi MIMO 2*2 antennas ...