Firmware update via the WebUI

Firmware update via the WebUI

From browsers, log into NodeGrid unit

Click on "System"

Click on "Toolkit"

Click on "Software Upgrade"

Select on "Local Computer"

Click "Browse"

Navigate to the folder where you downloaded the firmware update file

Click "Upgrade" button

You will get a pop up tell you that the system will reboot and all active sessions will be dropped.  Click "OK" to continue

Firmware will update and unit will reboot (this will take a couple minutes)


Once logged in, click on your user name and select "About" from the dropdown menu

Confirm that firmware is the right version

Your firmware update is complete

    • Related Articles

    • Modem firmware files and upgrade process

      As of June 01, 2020, all units shipped by ZPE should have the following firmware versions installed in each modem: SWI9X50C_01.07.02.00_ATT_002.008_004 SWI9X50C_01.08.04.00_GENERIC_002.012_001 SWI9X50C_01.08.04.00_VERIZON_002.015_002 Upgrading ...
    • Nodegrid upgrade through Redhat server

      Ansible can be used to upgrade Nodegrid device to newer version from server ( Redhat in this case ). Make sure ISO file has been copied to /etc/ansible/Firmware/ folder. First, one needs to create template to be copied on remote Nodegrid device. ...
    • Installing Firmware for LTE Modem

      Installing Firmware for the LTE Modem (Sierra EM7565). The modem installed in our Nodegrid SR product line is the Sierra EM7565 modem.   The link to download the firmware is provided below: ...
    • How Do I Upgrade the Software of My Nodegrid?

      Steps for the Nodegrid software upgrade via WebUI 1. Once you get the software from ZPE Systems (from your Sales representative), save the ISO file:       a. into your PC/laptop       b. into a Remote Server such as FTP, SSH, HTTP       c. into the ...
    • How to Manually Add Service Processors to NodeGrid via WebUI

      Select Managed Devices :: Devices, click the Add button to add a device in the system. For the purpose of this example, provide the following information:   Enter the name of the server you want to add. This device should be a server that supports ...