Related Articles
Rename an attached serial port
Prior to 5.10.x, to rename an attached serial port, you need to go to Managed Devices :: Devices, tick the serial port that you want to rename and click on "Rename": Then change the name and "Save": From 5.10.x you can now rename the serial port from ...
How to build the set-up for Virtual Serial Ports communicating to an end device, via the Nodegrid OS
Abstract: In the industry, some legacy applications impose to use serial ports (COM) to interface with the industrial automates. In this article, we will study a set-up in which a desktop emulates a virtual serial COM, and conveys the connection via ...
Power Control within Serial Session
Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...
Nodegrid Serial Console: Pinouts, Cables and Connectors
The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout). NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
Devices Pinout with Nodegrid serial port
The table below shows the configuration of the cable or adapter that you can make as the target device that you are connecting to Nodegrid serial ports (Cisco pinout) has proprietary pinout on their console port. 1. Nodegrid - Dell EqualLogic Pinout ...