Devices Pinout with Nodegrid serial port

Devices Pinout with Nodegrid serial port

Below you will find a table for various models of devices with RJ45 console port pinout not based on Yost (rolled pinout) which maps their respective pins and RS232 signals.
Note: by Nodegrid (NG), it is all Nodegrid models except for NSC-Txx-STND as it has legacy pinout.
Nodegrid serial ports are RJ45.





1. Nodegrid to Dell EqualLogic Pinout




Nodegrid  NG pin Dell EqualLogic pin Dell EqualLogic Pinout
RxD 3 3 TxD
Gnd 5 5 Gnd
TxD 6 2 RxD








2.  Nodegrid to Arista 




Nodegrid  NG pin    Arista pin Arista
RxD 3 3 TxD
Gnd 5 5 Gnd
TxD 6 2 RxD








3.  Nodegrid to Oracle Acme Packet 4600 device pinout




Nodegrid  NG pin    Oracle pin Oracle Acme Packet 4600 device pinout
RxD 3 6 TxD
Gnd 5 5 Gnd
TxD 6 3 RxD








4. Nodegrid to  Enconnex PDU pinout




Nodegrid  NG pin    Enconnex pin Enconnex PDU
RxD 3 2 TxD
TxD 6 3 Rxd
Gnd 5 5 Gnd








5.  Nodegrid to Huawei ATN910 pinout




Nodegrid  NG pin    Huawei pin Huawei
RxD 3 8 TxD
TxD 6 5 Rxd
Gnd 5 4 Gnd








6.  Nodegrid to OLD Cisco Switch pinout




Nodegrid  NG pin   Cisco pin Cisco Switch
RxD 3 2 TxD
TxD 6 3 Rxd
Gnd 5 5 Gnd












7. Nodegrid to Infinera pinout




Nodegrid  NG pin   Infinera pin Infinera
RxD 3 5 TxD
TxD 6 6 Rxd
Gnd 5 4 Gnd








8 Nodegrid to Nokia 7360 pinout




Nodegrid  NG pin   Nokia 7610 pin Nokia 7360
RxD 3 5 TxD
TxD 6 6 Rxd
Gnd 5 4 Gnd








9 Nodegrid to Ciena 5170 pinout




Nodegrid  NG pin  Ciena 5170 pin Ciena 5170
RxD 3 4 TxD
TxD 6 3 Rxd
Gnd 5 5 Gnd








10 Nodegrid to APC PDU/UPS RJ12




Nodegrid  NG pin APC pin APC (RJ12)
RxD 3 3 TxD
TxD 6 4 Rxd
Gnd 5 5 Gnd

11 Nodegrid to SonicWall

NodegridNG pinSonicWall pinSonicWall
RxD
3
5
RxD
TxD
6
6
Txd
Gnd
5
4
Gnd

12 Nodegrid USB-A to Aruba CX USB-C port

Aruba CX 6000 series has a USB-C port. The Type-C port in Aruba switch has the RS232 chipset internally.
USB to USB-C cable can be used to connect to the Aruba USB-C port.
Standard USB-A to USB-C cable can be used to connect Nodegrid USB-A port to Aruba USB-C port for serial connection.

For an example : USB-A to USB-C Cable ( Just for the reference )
































































































































































































































































































































































    • Related Articles

    • Nodegrid Serial Console: Pinouts, Cables and Connectors

      The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout).  NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...
    • How to build the set-up for Virtual Serial Ports communicating to an end device, via the Nodegrid OS

      Abstract: In the industry, some legacy applications impose to use serial ports (COM) to interface with the industrial automates. In this article, we will study a set-up in which a desktop emulates a virtual serial COM, and conveys the connection via ...
    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...
    • Power Control within Serial Session

      Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...
    • How to Telnet and SSH to the Nodegrid Serial Ports

      Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...