Configuring PDUs

Configuring PDUs

The solution supports multiple third-party rack PDU from differente vendors including products from APC, CPI, CyberPower and ServerTech.

These devices can be added to Nodegrid  OS and the system lets you connect to the rack PDU and control the outlets. Outlets also can be associated to specific target devices which lets you control the specific power outlets for this target device.

Learn how to add PDU's to ZPE Systems' Nodegrid Manager for power control and monitoring

Follow the link for how to video Configuring PDUs

    • Related Articles

    • Configuring Service Processor Devices

      The Nodegrid platform supports multiple IPMI based service processors like IPMI 1,5, IPMI 2.0, Dell DRAC and iDRAC. To manage these devices  the Nodegrid OS requires a valid network connection to the target device. This can be through a dedicated ...

    • Configuring Session Idle Timeout

      The idle session timeout is the number of seconds to timeout the open sessions due to inactivity. Changes made will affect the new sessions only, the open sessions which are already in use will continue to follow the timeout value since the start of ...

    • Configuring the Basic Network Settings using the Command Line Interface

      The network settings can be configured manually via Command Line if there are no DHCP servers in the network or it is to be changed to dynamic IP to static IP. Follow the steps to configure the Network settings via CLI When the prompt appears type cd ...

    • Configuring OSPF Options On A Nodegrid Appliance & Neighbor Adjacency

      Configuring OSPF Nodegrid Appliance & Neighbor Adjacency The Nodegrid OS uses FRR (Free Range Routing Suite) to implement routing protocols such as OSPF. FRR is a fully featured, high performance, free software IP routing suite. To enable OSPF ...

    • Configuring an LTE Connection

      Log into your Nodegrid's Management Portal and then go to "Network::Connections". Click on the "Add" button. Give the new connection a "Name:" and be sure to select the correct "Type:" and "Interface:" (Mobile Broadband GSM and cdc-wdm0 is the modem ...