Configuring PDU’s

Configuring PDU’s


    • Related Articles

    • Configuring PDU’s

    • Configuring PDUs

      The solution supports multiple third-party rack PDU from differente vendors including products from APC, CPI, CyberPower and ServerTech. These devices can be added to Nodegrid  OS and the system lets you connect to the rack PDU and control the ...
    • Configuring Service Processor Devices

      The Nodegrid platform supports multiple IPMI based service processors like IPMI 1,5, IPMI 2.0, Dell DRAC and iDRAC. To manage these devices  the Nodegrid OS requires a valid network connection to the target device. This can be through a dedicated ...
    • Configuring Session Idle Timeout

      The idle session timeout is the number of seconds to timeout the open sessions due to inactivity. Changes made will affect the new sessions only, the open sessions which are already in use will continue to follow the timeout value since the start of ...
    • Configuring the Basic Network Settings using the Command Line Interface

      The network settings can be configured manually via Command Line if there are no DHCP servers in the network or it is to be changed to dynamic IP to static IP. Follow the steps to configure the Network settings via CLI When the prompt appears type cd ...