Can PoE interfaces have power while data connectivity is disabled?
For PoE interfaces, the power and data are configured independently. When the PoE option is set to Enabled and Network Status is set to Disabled, connected devices will continue to receive power.
Related Articles
What are the PoE (Power over Ethernet) limitations on an NSR?
The PoE modules are PoE+ (802.3at Type 2). The inrush power is limited by the PoE chip to 425 mA during power on per IEEE specification. Then this limit is changed to the programmed limit once inrush is completed. The programmed limit is the power ...
Exploring Data Points
This section will describe how you can verify that we are actually persisting the data collected and to learn more about the data being collected. This knowledge will be helpful in the Creating a Visualization article. First, make sure that you have ...
How to setup Data Logging for one or more Devices to save data locally
Data logs capture all information send to a device and coming from a device. You can choose to store the logs locally or remotely. Configuration via WebUI: 1. Login as admin and navigate to Managed Devices 2. Select the target device and go to ...
How to Manually add Power Strips to NodeGrid via WebUI
Power Strip requirements: - it must have a network interface (smart PDU) - it must be a switched PDU Select Managed Devices :: Devices, click the Add button to add a device in the system. For the purpose of this example, provide the following ...
Power Control within Serial Session
Nodegrid Serial Console features the Power Control integration which gives authorized users the ability to power on, power off and reset/reboot the serial devices, within the serial session, by using an escape character (default escape character is ...