Nodegrid hardware description with "SLC-LITE AES".

Nodegrid hardware description with "SLC-LITE AES".

SLC-lite is a ZPE's SSD vendor's proprietary technology that strikes a cost-performance balance between MLC and SLC flash types and it is an ideal alternative solution for mission-critical embedded or industrial applications. It utilizes the infrastructure of MLC flash together with the special firmware to simulate the performance and durability of industrial grade flash SLC, which enable the maximum endurance, retention and performance but lower cost.

AES is related to the SSD HW encryption supported on in all ZPE systems appliances (newer hardware revisions)

    • Related Articles

    • Nodegrid Manager Installation in ESXi 5

      Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process:  Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...

    • Nodegrid Manager Installation in ESXi 6

      Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process:  Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...

    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...

    • Nodegrid Serial Console: Pinouts, Cables and Connectors

      The tables below show the serial port pinout information of the NSC TxxR (Cisco Pinout) and NSC Txx (Legacy Pinout).  NSC TxxR - Cisco-like Pinout Pin Signal Name Input/Output 1 CTS IN 2 DCD IN 3 RxD IN 4 GND N/A 5 GND N/A 6 TxD OUT 7 DTR OUT 8 RTS ...

    • How to Telnet and SSH to the Nodegrid Serial Ports

      Note: by default, Telnet access is turned off with your Nodegrid Serial Console. Authorized users can use Telnet or SSH to connect directly to the console of a managed device if all of the following are true: Telnet / SSH protocol is enabled under ...