Apply HTTPS certificate in Nodegrid via WebUI

Apply HTTPS certificate in Nodegrid via WebUI

Follow these steps to apply HTTPS certificate via WebUI
Prerequisite:
- Certificate signed by CA (.pem or .crt)

Steps for version 6.0.x
1. Login as admin in WebUI and go to Security::Certificates
2. Click Upload Certificate to add the certificate
3. Enter the required certificate name
4. In Certificate Location, select the appropriate location for the certificate. Enter the password if it is given while generating certificate.


      
5. Click Save to save the settings. Uploaded certificate will be available in the certificate list
6. Select the certificate from the list and click Apply as System Certificate. The new certificate will be applied.

You can also upload certificate from System::Toolkit::System Certificate::Upload Certificate

Steps for version 5.10.x and 5.8.x 
1. Go to System::Toolkit::System Certificate::Upload Certificate
2. Select the location for the Certificate
3. Enter the passphrase if required
4. Click Apply to save the settings and applying the certificate.

Note: You might need to restart the browser to see the changes applied in the certificate

If you see the error related to private key, refer this knowledge base to solve it,
    

    • Related Articles

    • Apply HTTPS certificate in Nodegrid

      Follow the steps from this article to generate a certificate signed request.  Then log in as admin to Nodegrid WebUI, and go to System :: Toolkit :: System Certificate. Upload the certificate file in .pem or .crt extension by selecting Local Computer ...

    • I'm getting "unsupported media type" message when applying HTTPS certificate via WebUI.

      The format of the certificate file should be .pem or .crt. Try replacing the current extension to .pem or .crt. For more information on how to generate Signed Certificate and upload to Nodegrid, please refer to the KB articles: ...

    • Wireguard Configuration via WebUI - Nodegrid

      Wireguard is a security-focused virtual private network known for its simplicity and ease of use. Nodegrid supports wireguard configuration from both Shell and Gui. Follow these steps to configure wireguard vpn tunnel via WebUI between two Nodegrid ...

    • Improved NodeGrid WebUI: Apply Settings using Local System option

      To Save the current configuration of your NodeGrid, follow the steps below (5.x.x and 6.x.x NodeGrid Versions) WebUI 1. Go to System, Toolkit, and click on Save Settings icon. 2. Select the option where you want to save the configuration: a. Local ...

    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...