About the Status page to check processes or reboot a Nodegrid device

About the Status page to check processes or reboot a Nodegrid device

To enable the Status page from GUI:
  1. Navigate to Security :: Services :: General Services
  2. Check the option for Enable Services Status Page
  3. Optional: Check the option for Enable reboot on Services Status Page
  4. Click Commit

To access the Status page from GUI:

  1. Navigate to https://x.x.x.x/services/status
    1. Note: Replace x.x.x.x with the IP of the Nodegrid device
  2. Login as user associated with the admin group

The Status page will display the current status of critical system process.  If enabled, there is a reboot button which will ensure all processes are restarted in the correct order.  This feature was introduced v5.2.14, v5.4.9, & v5.6.x, and is available on all newer versions.  Here is an example of this page:




    • Related Articles

    • How to: Enable ZPE Cloud in a Nodegrid device

      ZPE Cloud is a powerful platform that allows you to manage your Nodegrid devices from anywhere in the world. In order to use the benefits of managing your Nodegrid devices through ZPE Cloud, you need to enroll the Nodegrid device to your company and ...

    • How to Configure Nodegrid Serial Ports

      To configure the serial ports of your Nodegrid Serial Console, follow the guideline steps below.   WebUI Log in as admin to the Nodegrid Serial Console Web interface. Go to Managed Devices page. Select the serial ports you want to configure, or check ...

    • Nodegrid Manager Installation in ESXi 5

      Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process:  Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...

    • Nodegrid Manager Installation in ESXi 6

      Nodegrid Manager software is installed from an ISO file. The installation procedure is a three-stage process:  Creating a virtual machine; Booting from the ISO file in order to install the software; Restarting and booting from the newly created ...

    • How does Nodegrid determine the status of each Managed Device for serial connections?

      Nodegrid appliances with RJ45 and USB serial ports will use the incoming RS232 signals to determine the status shown on the Access pages: Green indicates the device is ready and no users are connected to it. Grey indicates the device is not ready and ...